Bring Your Beer Right to you with a Beer Keg Tap
We can always find beer kegs during parties or picnics with our family and friends. Thirsty people need to drink a lot so the keg is really cost effective and could save money. IF you have a keg tap, this device will allow you to release the beer into your drinking cup from the keg. It is easy to use a keg tap but you must be careful not to waste beer if you are not sure how to do it correctly. Improper use of the keg tap can let foam go all over your face or all over you. It is not as easy as you see people doing it.
The release of the beer is regulated by the keg tap. This uses a lever and through pulling and pressing it, the beer is released. When pressure is released, it pushes the beer up and into the glass. The keg tap is technically a switch and may be an on-off or a close-open switch.
To minimize the foam it creates when pouring, place the beer keg in a steady position for a short while; the beer keg should be directly in front of you. When there is too much movement while transporting the keg, the foam builds up. Let it stay for a while and place the keg where you plan to serve the beer to minimize the foam. You should remove the cap or seal since it is harder to tap with it. However, the pros do not remove the cap or seal because they will not put the beer at risk like you will. You need to play it safe.
Tapping with CO2 is done with portable keg systems. Party pump is when pressure is receive by the keg in a single unit pump and tap combination. IN this type, the keg and the beer keg tap are separated. To release the pressure in the ked, the pump is attached and the faucet is opened. Pumping gives air pressure into the keg, and a push on the lever, which is the tap handle that releases beer.
A portable beer keg or a pony keg should be finished in a single because after that the beer loses its flavor when it is mixed with air. Traditional keg uses an on and off valve. By using this, you are serving by gravity, and there is no air pressure needed. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.
Recommended reference: blog link