Wood Preservation Methods

Wood science is the study of wood as a material that is renewable and of biological origin. In other words, the term wood science can also be known as wood technology. Other products are put alongside wood for easy testing and study. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. The many Merits of timber and these technologies improve wood to be superior over other products. Some of these advantages include wood being a versatile material that can be used in a wide range of products. It is also based on renewable resources. Timber can be utilized in very many applications, and this makes it more valuable.

For your wooden products and house to stay for long and have a good appearance it needs to be protected. The biggest threat to wood being moisture and insects has to be kept away from the wood. The water particles in the timber increase the rotting and the insects bore through the wood. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. The protection of from this chemical is based on copper. Although being a good method to use for wood protection it has presents some few challenges. It has been seen corroding most metals for example aluminum in less than six months of its application. The concentration of the chemical that will be used to treat a piece of wood will depend on the where it is going to be used and the molecular structure of the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.

Many methods are being invented to protect the wood, and one of them is the copper metal method. This method, unlike the ACQ, is friendly to the metal fasteners and its gaining popularity very fast. Micronized copper wood preservative is the correct term to refer this type of preservation. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. The characteristics of the wood are highly improved and the when this process is used to treat wood. The wood products protected using this method last longer.

Termites and fungal decay are just a few among the many problems wood treated from this method are protected against. It is not corrosive to metals used in together with the product. When you use this method to treat wood, then you will not need to worry for at least ten years.

Leave a Reply

Your email address will not be published. Required fields are marked *